Best replacement key fobs for Ford Escape
Ford has sold the Escape in America since the 2001 model year, and in that time it has used four kinds of key: a chipped key with a separate remote, a remote head key, a flip key and a push-button smart key. The right replacement depends on your Escape's year, its ignition type and the FCC ID printed on your old key, and the right one costs far less than a dealer key.
We split our eight picks into two tables: Escapes you start with a key, and Escapes with push-button start. Each pick names the years it fits, the FCC ID and part number to check, and how it gets programmed, so you know before you buy whether it’s a driveway job or a locksmith visit.
Key takeaways
- Read the back of your key The FCC ID and part number decide what works, not the photo.
- Key or push start? Turn-key and push-button Escapes from the same year use different keys.
- Two keys save money With two working keys, many Escape owners can add a third at home.
- 2020-on keys are different Fourth-generation smart keys use 902 MHz and need a locksmith.
Which replacement key fobs for Ford Escape fit your year
The best replacement key fobs for Ford Escape owners are the ones that match the key already on your ring, and the Escape has changed its key more often than most SUVs. Before you look at prices, work out which of the four key types you have.
2001–2007 (first generation). These Escapes, built alongside the Mazda Tribute, start with a plain metal key that has a transponder chip in its head. Locking and unlocking is done by a separate remote on the key ring. You can replace either part on its own.
2008–2012 (second generation). The idea stays the same: a chipped metal key plus a separate four-button remote with lock, unlock, liftgate and panic. Many of these remotes carry FCC ID OUCD6000022, the same ID Ford later used on its remote head keys, so always read the part number too.
2013–2019 (third generation). S and most SE models switched to a remote head key, with the buttons moulded into the head of a high-security blade. Titanium models, and SE models with the option, have Intelligent Access with push-button start and a proximity smart key (FCC ID M3N5WY8609) that stays in your pocket.
2020 onward (fourth generation). Most Escapes now have push-button start and a newer smart key (FCC ID M3N-A2C931426) that works on 902 MHz rather than the old 315 MHz band. Keyed versions use a flip key.
The FCC ID is moulded into the back of a separate remote, and on a head key or smart key it's on the back or under the battery cover. Match it, the Ford part number and the number of buttons. A listing that only says "fits Ford Escape" isn't enough; the best replacement key fobs for Ford Escape models name all three.

Replacement key fobs for keyed Ford Escapes
|
2001–2005
2001–05 chip keys 2-pk
|
2005–2012
Keylessbest remote
|
2013–2019
3-btn head key
|
Keyed late models
Keylessbest flip 2-pk
|
|
|---|---|---|---|---|
|
|
|
|
|
| Escape years | 2001–2005 | 2005–2012 | 2013–2019 | Keyed late models |
| FCC ID | Chip key, no FCC | OUCD6000022 | OUCD6000022 | N5F-A08TAA |
| Type | Chip key | Separate remote | Remote head key | Flip key |
| Programming | 2-key routine | 8-turn routine | 2-key or locksmith | 2-key or locksmith |
| In the box | 2 keys | 1 remote | 1 key | 2 keys |
| Our score | 8.2 /10 | 8.5 /10 | 9.0 /10 | 8.4 /10 |
| Price | – | – | – | – |
| View | View | View | View |
Replacement key fobs for push-button Ford Escapes
|
2013–2019
5-btn smart key
|
2013–2020
SUPALAND smart 2-pk
|
2020–2023
KEYS4LESS 5-btn
|
2020–2022
2020–22 smart key
|
|
|---|---|---|---|---|
|
|
|
|
|
| Escape years | 2013–2019 | 2013–2020 | 2020–2023 | 2020–2022 |
| FCC ID | M3N5WY8609 | M3N5WY8609 | M3N-A2C931426 | M3N-A2C931426 |
| Type | 5-btn smart key | 5-btn smart key | 5-btn smart key | 5-btn smart key |
| Programming | 2-key or locksmith | 2-key or locksmith | Locksmith | Locksmith |
| In the box | 1 key | 2 keys | 1 key | 1 key |
| Our score | 8.6 /10 | 8.7 /10 | 8.8 /10 | 8.3 /10 |
| Price | – | – | – | – |
| View | View | View | View |
Replacement key fobs for Ford Escape: detailed reviews
Two chipped ignition keys for first-generation Escapes, with no remote buttons
The first Escape, built from the 2001 model year and shared with the Mazda Tribute, came with a plain metal ignition key and a separate keyless entry remote. The key has a transponder chip inside its plastic head, and Ford’s PATS anti-theft system won’t let the engine run unless it recognises that chip. If your remote still works but you’re down to one key, this is the part you need.
The pack holds two uncut keys listed for 2000–2005 Ford Focus, Escape and Mazda Tribute, on the H74-PTH and H86-PT blanks. The seller says the keys are self-programmable when you already have two working master keys, and includes the steps. Any hardware store or locksmith with a Ford key machine can cut the blades.
It’s the cheapest way to restore a spare on an early Escape. Check the year carefully: 2006 and 2007 cars moved to a different chip, and this pack doesn’t include a remote.
- Two keys per pack
- Self-programmable with two working keys
- Cheap to cut at a hardware store
- No remote buttons
- 2001–2005 only
- Blades must be cut
A separate lock-and-unlock remote for second-generation Escapes
From the mid-2000s until the 2012 model year the Escape kept a separate remote on the key ring: lock, unlock, liftgate and panic buttons, with no blade and no chip. Keylessbest’s remote is listed for 2005–2012 Escape, Edge, Mariner and Tribute models with FCC ID OUCD6000022 and Ford part number 164-R7040, at 315 MHz.
Because the remote has nothing to do with starting the engine, it’s the easiest Escape key to replace. The listing tells you to have a locksmith program it, but on most of these cars the onboard routine works: cycle the ignition from off to on eight times within about ten seconds, wait for the locks to cycle, then press a button on each remote you want to keep. Every remote you want to use has to be paired in the same session.
Buy this if your remote has died, cracked or gone missing but your metal key still starts the car.
- Easy to pair with the 8-turn routine on most cars
- No cutting or chip programming
- Low price
- Remote only: it won’t start the car
- Listing advises locksmith programming
- Check the liftgate button matches
Our top pick among replacement key fobs for Ford Escape SUVs with a turn-key ignition
The third-generation Escape (2013–2019) sold in huge numbers, and most S and SE models start with a key. Their key is a remote head key: lock, unlock and panic buttons built into the head of a high-security HU101 blade, with a transponder chip inside. This replacement is listed specifically for the 2013–2019 Escape and 2014–2019 Transit Connect, with FCC ID OUCD6000022, 315 MHz and a CR2032 battery already fitted.
It needs two jobs before it works. A locksmith or dealer cuts the blade, and then the chip and remote are programmed. If you already have two working keys you can usually do the programming yourself with Ford’s two-key routine, which makes this one of the cheapest ways to get a spare.
It’s our best overall pick because it fits the Escape that most readers own and is listed for the Escape by name rather than buried in a long list of Fords. Check that your old key has three buttons; some Escapes have a four-button key with a liftgate button.
- Listed for the 2013–2019 Escape by name
- DIY programming with two working keys
- Battery fitted and pre-tested
- Blade must be cut (HU101)
- Not for push-button cars
- Check 3- vs 4-button layout
Two flip keys for keyed late-model Escapes
Late-model Fords with a keyed ignition use a flip key with a fold-away blade and lock, unlock and panic buttons. Keylessbest’s two-pack carries FCC ID N5F-A08TAA and Ford part number 164-R8130 at 315 MHz, and the listing names the Escape alongside the Bronco Sport, EcoSport, F-150 and Ranger.
Before ordering, confirm that your Escape really has a flip key. Most 2020-on Escapes have push-button start and use a smart key instead, so this pack suits the keyed versions and fleet cars. The keys come unprogrammed and uncut; the seller recommends a locksmith, although owners with two working keys can often add one with Ford’s onboard routine.
Two keys in one order make this good value if you want a spare as well as a replacement.
- Two keys in the pack
- Fold-away blade
- Correct 315 MHz N5F-A08TAA key
- Most 2020-on Escapes use a smart key instead
- Uncut and unprogrammed
- General Ford listing

A proximity key for push-button Escapes from the third generation
Escape Titanium models, and SE models with the push-button start option, use Ford’s Intelligent Access smart key. You keep it in your pocket, the car senses it, and the five buttons lock, unlock, open the liftgate, sound the panic alarm and start the engine remotely. The FCC ID is M3N5WY8609; this replacement lists Ford part numbers 164-R8092 and 5921286 and names the 2011–2020 Escape and Explorer.
The listing promotes self-programming, and on many Fords you can add a smart key yourself when two working keys are already programmed, using the backup slot. With one key or none you’ll need a locksmith with a Ford-capable programmer. An emergency blade sits inside and needs cutting if you want to open the driver’s door with a flat battery.
Choose it if your Escape has push-button start and a five-button key. If your key has four buttons and no remote start, match that instead.
- Remote start and liftgate buttons
- Emergency blade included
- DIY add possible with two keys
- Locksmith needed with one key
- Blade needs cutting
- Long multi-model fitment list
Two Intelligent Access keys for push-button Escapes
SUPALAND’s pack contains two pre-tested five-button proximity keys with electronics and batteries fitted, covering FCC ID M3N5WY8609 and part numbers 164-R8092, 164-R8094, 5921286 and 5921288. The listing names the Escape for 2017–2020, with the Explorer, Edge, Flex, Taurus and several Lincolns.
The seller is clear about programming: with two working keys you can add a third yourself; otherwise a locksmith has to do it. That honesty is one reason it ranks well here. Two keys per order also make it a sensible buy if you’ve lost one smart key and want to rebuild to a full set in one locksmith visit.
As with every smart key, match the button layout. A five-button key with remote start won’t add remote start to an Escape that left the factory without it.
- Two smart keys per order
- Clear programming instructions
- Pre-tested with batteries
- Higher upfront cost
- Locksmith needed with fewer than two keys
- Check remote start on your car
The smart key written for the fourth-generation Escape
The redesigned Escape that arrived for 2020 moved to a newer smart key on the 902 MHz band, FCC ID M3N-A2C931426, with part numbers including 164-R8198 and 164-R8278. KEYS4LESS lists this five-button key specifically for the 2020–2023 Escape, and it comes assembled with its battery and pre-tested.
These keys need professional programming in most cases: a locksmith with current Ford software or a dealer. Fourth-generation keys also use a different emergency blade from older Escapes, so let the locksmith cut it at the same visit.
Pick it if you own a 2020-or-later Escape with push-button start and want a listing that names your car rather than the whole Ford range.
- Listed for the 2020–2023 Escape specifically
- Correct 902 MHz M3N-A2C931426 key
- Pre-assembled and tested
- Professional programming needed
- Highest price per key here
- Blade cut extra
A lower-cost proximity key for 2020–2022 Escapes
This 5-button smart key carries the same M3N-A2C931426 FCC ID and 164-R8198 part number at 902 MHz, and the listing names the 2020–2022 Escape along with the Explorer, Expedition, Maverick and Bronco. It costs less than our KEYS4LESS pick, which makes it attractive if you need two keys.
It’s a complete aftermarket key that must be programmed and have its emergency blade cut. The seller says vehicle compatibility is for reference only, so compare your old key’s FCC ID, part number, button layout and shape before buying.
It suits budget-minded owners of a 2020–2022 Escape who are going to a locksmith anyway and want the lowest price per key.
- Lower price than most 2020+ keys
- Remote start and liftgate buttons
- Same FCC ID and part number as the OEM key
- Seller says fitment is for reference only
- Professional programming needed
- Blade must be cut
Programming replacement key fobs for Ford Escape at home
Whether you can program replacement key fobs for Ford Escape models yourself depends on two things: what kind of key it is and how many working keys you already have.
A separate remote on a 2001–2012 Escape is the easy case. It doesn't touch the anti-theft system, so you pair it with the onboard routine: turn the ignition from off to on eight times within about ten seconds, ending on. The locks cycle to show the car is in programming mode. Press any button on each remote you want to keep, including your old one, then switch off. Remotes you don't press in that session are dropped.
Anything that starts the engine (a chipped key, a remote head key, a flip key or a smart key) has to be taught to PATS, Ford's Passive Anti-Theft System. Ford built in a two-key routine for this: switch on with your first programmed key for a few seconds, switch off, do the same with your second key within about ten seconds, then switch on with the new key. Ford's own guide to programming an integrated keyhead transmitter walks through the timing. On push-button Escapes the same idea uses the backup slot, where you place the key when its battery is flat; Ford explains where to find the Intelligent Access backup slot for each model.
The catch is the word "two". With only one working key, the routine won't run, and you need a locksmith or dealer with diagnostic equipment. That's why the cheapest moment to buy a spare is while you still have two keys. Our guide to replacement key fobs you can program yourself covers the wider picture.
Fourth-generation smart keys are the exception among replacement key fobs for Ford Escape owners: expect to pay a locksmith or dealer to program them even if you have two keys.
What Escape owners like and complain about
Common problems with replacement key fobs for Ford Escape
The most common complaint on Escape owner forums isn't a broken key at all, it's a flat battery. Short range, buttons that work only next to the car and a Titanium that says no key is detected usually mean the CR2032 coin cell is tired. Swap it first; our guide to changing a Ford key fob battery shows how, and why a car stops detecting its key fob covers the other causes.
The second complaint is worn hardware. Remote head keys on 2013–2019 Escapes crack around the blade and wear through their rubber buttons after years on a heavy key ring. If the electronics still work, a new shell is cheaper than a new key, and you won't need programming because the chip and circuit board move across.
When owners do buy replacement key fobs for Ford Escape models, the bad reviews are almost always about fit and programming rather than build quality. Typical stories: a four-button key bought for a car with three buttons, a 315 MHz key bought for a 2021 Escape that needs 902 MHz, a separate remote ordered when the car actually has a head key, or a smart key that a locksmith couldn't program because the listing was for a different Ford. Every one of those is avoided by matching the FCC ID and part number.
Owners who are happy with aftermarket keys tend to say the same things: the key worked once it was cut and programmed, it cost a fraction of the dealer price, and buying two at once meant one locksmith visit instead of two.
How to choose replacement key fobs for Ford Escape
These decide whether the key will talk to your Escape.
Turn-key and push-button Escapes use different keys, even in the same model year.
2013–2019 smart keys run at 315 MHz; 2020-on smart keys use 902 MHz.
A key can’t add features your Escape doesn’t have, such as remote start.
DIY works for separate remotes and, with two working keys, for most chipped keys.
How to add a spare key to your Escape
-
Count your working keys
Ford’s onboard routine needs two keys that already start the car. With only one, book a locksmith or dealer.
-
Order the matching key
Match the FCC ID, part number, frequency and buttons from the tables above.
-
Get the blade cut
Have a locksmith cut the new blade, or the emergency blade inside a smart key, to match your old key or the car’s key code.
-
Run the two-key routine
Switch on with the first key, then the second, then the new key, keeping to the times in your owner’s manual. Ford’s keyhead transmitter guide walks through it.
-
Test everything
Check that the new key starts the engine and that every button works from a few yards away.
On a 2001–2012 Escape with a separate remote, you can pair a new one yourself with the eight-turn ignition routine. If you’ve lost every key, read what to do if you lose your only car key.

OEM vs aftermarket replacement key fobs for Ford Escape
A genuine Ford key from a dealer is the safest fit, but it's also the most expensive route, because you pay dealer prices for the key and then a separate charge to cut and program it. Aftermarket replacement key fobs for Ford Escape models cost a fraction of that, and the good ones carry the same FCC ID, frequency and chip type, so the car can't tell the difference once they're programmed.
The trade-offs are real, though. Aftermarket cases are usually lighter and the buttons can feel softer. Quality varies more between sellers, which is why we favour listings that state the FCC ID, part number and programming method clearly, and sellers that pre-test their keys. Some locksmiths prefer to supply their own keys and charge more to program one you bring, so ask before you buy.
For most owners the sensible split is simple. A separate remote or a remote head key for an older Escape is a safe aftermarket buy. A 2020-on smart key is also fine aftermarket if you're paying a locksmith to program it anyway; just match the part number exactly.
Who each pick suits
Choosing between these replacement key fobs for Ford Escape models comes down to the model year and the ignition. If you drive a turn-key 2013–2019 Escape, start with our best overall pick, the 3-button remote head key: it's the key most readers need. Owners of 2005–2012 Escapes whose remote has failed only need the Keylessbest remote, and first-generation owners short of a spare ignition key should look at the 2001–2005 chipped key pack.
Push-button 2013–2019 Escapes take the M3N5WY8609 smart key; buy the SUPALAND two-pack if you want a full set in one visit. For 2020-on Escapes, choose the KEYS4LESS key for a listing written for your car, or the lower-cost 2020–2022 key if price matters most. Our Ford key fob roundup covers other Ford models, and the Ford Focus and Ford F-150 guides cover those keys in the same detail.
Replacement key fobs for Ford Escape: FAQ
Can I program a Ford Escape key fob myself?
Often, yes. Separate remotes on 2001–2012 Escapes pair with the eight-turn ignition routine. Chipped keys, head keys and 2013–2019 smart keys can usually be added at home if you already have two working keys. With one key, or on most 2020-on smart keys, you’ll need a locksmith or dealer.
Where is the FCC ID on my Escape key?
On a separate remote it’s moulded into the back of the case. On a remote head key or smart key it’s on the back or under the battery cover. Note the Ford part number too, which often starts with 164-R.
Will a 2019 Escape smart key work on a 2021 Escape?
No. 2013–2019 smart keys use FCC ID M3N5WY8609 at 315 MHz, while 2020-on Escapes use M3N-A2C931426 at 902 MHz.
What battery does a Ford Escape key fob use?
Most Escape remote head keys and smart keys use a CR2032 coin cell. See our Ford key fob battery guide for how to change it.
Is an aftermarket Escape key as good as a dealer key?
A well-made aftermarket key with the same FCC ID, part number and chip works the same once it’s programmed. The case may feel lighter, and quality varies by seller, so buy from listings that state the specifications clearly.
The bottom line
- Check whether your Escape is keyed or push-button first
- Match the FCC ID, part number, frequency and buttons
- Buy a spare while you still have two working keys
- 2020-on smart keys need a locksmith
The best replacement key fobs for Ford Escape SUVs are the ones that match your key exactly. The 3-button remote head key is our top pick because it fits the huge number of keyed 2013–2019 Escapes and can be added at home with two working keys. Older Escapes with a separate remote need only the Keylessbest remote, and push-button owners should match the M3N5WY8609 or M3N-A2C931426 smart key to their model year.



