Chevrolet key fob battery replacement in five minutes
A Chevrolet key fob battery replacement fixes most 'dead fob' problems for the price of a coin cell. This guide shows which battery your Chevrolet takes, how to open each style of fob, and what to do if it still won't work.
It covers the Silverado, Equinox, Tahoe, Suburban, Traverse, Malibu, Colorado, Trax and other Chevy models, with both flip keys and push-button-start smart keys. No reprogramming is needed.
- Which battery your fob takes
- How to open flip keys and smart keys
- What to check if it still won't work
- How to start with a dead fob
Key takeaways
- Most take a CR2032 The majority of Chevrolet fobs from the last 15 years use a 3V CR2032 coin cell.
- Newer smart keys may differ Some of the latest push-button-start GM fobs use the thicker CR2450. Read the old cell before you buy.
- No reprogramming needed A GM fob keeps its pairing when you change the battery.
- Dead fob? Use the pocket Every push-button GM vehicle has a backup spot where a dead fob can still start the engine.
Which battery does my Chevrolet key fob take?
For most Chevrolet owners the answer is a CR2032. Energizer's own fit guide lists the CR2032 for the Equinox and Express across 2014 to 2023, and the same cell sits in the flip keys and smart keys used on a long list of GM models.
The exception is GM's newest push-button-start fobs. Battery sellers flag that their CR2032 packs don't fit the passive-entry fobs on recent full-size trucks and SUVs, and those keys use a CR2450 instead. Recent Silverado and Tahoe/Suburban smart keys, and the 2025 Equinox proximity fob, are among those reported to use the CR2450.
The rule that never fails: open the fob and read the code printed on the old cell. A CR2450 is thicker and narrower than a CR2032, so the two can't be swapped.
Chevrolet key fob battery at a glance

How to replace a Chevrolet smart key battery
-
Remove the emergency key
Press the release button on the side or back of the fob and slide out the metal key.
-
Open the case
On many GM smart keys the key itself fits a slot at the base of the fob: insert it and twist gently to separate the halves. Older styles have a notch along the seam.
-
Note the orientation
Most GM fobs fit the cell with the + side facing a particular way. Take a photo before you remove the old one.
-
Fit the new cell
Slide it under the contacts by its edges, avoiding the flat faces.
-
Close and test
Press the halves together all the way round, refit the key, then test lock, unlock and push-button start.
How to replace a Chevrolet flip key battery
-
Fold the blade out
Press the button so the key blade swings out of the way.
-
Remove the battery cover
Find the notch on the side of the remote section and separate the cover with a fingernail or plastic tool.
-
Swap the CR2032
Lift the old cell out and fit the new one the same way up.
-
Snap it shut and test
Make sure the seam is flush, then test from a normal distance.
The best batteries for your Chevrolet fob
The safe default for most key fobs
Energizer’s CR2032 is the cell to reach for when your fob takes a 2032. Fobs draw short bursts of power with every button press and every keyless check, and branded lithium cells handle that well. The cells are uncoated, so they make clean contact in tight holders. A four-pack covers your main fob, your spare and the next swap.
- Fits the most common fob size
- Uncoated for clean contact
- Four-pack covers both fobs
- Buy from Amazon itself or a known retailer: fakes exist
- Packaging is fiddly
For newer smart keys that take the thicker cell
Several newer push-button-start fobs use a CR2450 instead of a CR2032. It’s wider and thicker, with more capacity, and the two are not interchangeable. If the old cell in your fob says 2450, this Energizer two-pack covers your main fob and spare.
- Correct size for newer smart keys
- Higher capacity than a CR2032
- Trusted brand
- Only fits fobs designed for CR2450
A trusted brand with a child-safety coating
Duracell’s key fob cells carry a bitter coating that discourages children from swallowing them. The trade-off is that the coating occasionally stops a cell making good contact in tight holders; if a new one doesn’t work, wipe it with an alcohol wipe or try an uncoated cell.
- Bitter coating for child safety
- Packaged for key fobs
- Easy to find
- Coating can cause poor contact in some fobs

Chevrolet key fob still not working after a new battery?
If nothing happens after a fresh cell, check these before buying a new fob:
- Is the battery the right way up? It's the most common slip.
- Is it the right size? A CR2025 or CR2032 in a CR2450 fob won't make proper contact.
- Is the cell fresh? Old stock and fakes can be flat out of the packet.
- Does the spare work? If so, the first fob may be damaged.
- Is it the car? If both fobs fail, read our guide to the Chevrolet no remote detected warning.
Our general guide on why a key fob stops working after a battery change covers more causes, and if the case is cracked see how to replace a key fob shell.
Every push-button-start Chevrolet has a transmitter pocket where the car can read a fob with a flat battery. Depending on the model it’s in or under a cupholder, in the center console or, on older Corvettes, in the glovebox. Put the fob there, press the brake and press Start.
Chevrolet key fob battery FAQ
What battery does a Chevrolet key fob take?
Most take a 3V CR2032. Some of GM’s newest push-button-start fobs use a CR2450. Check the code printed on your old battery.
Do I need to reprogram my Chevrolet fob after changing the battery?
No. The fob keeps its programming.
How do I know my Chevrolet fob battery is low?
Shorter range, needing several presses and a ‘Replace battery in remote key’ message on the driver information center are the usual signs.
Can I use a CR2025 instead of a CR2032?
It’s thinner and may not make reliable contact. Use the size printed on the old cell.
How do I start my Chevrolet if the fob is dead?
Put the fob in the transmitter pocket or backup location shown in your owner’s manual, press the brake and press Start.
The bottom line
- Most fobs take a CR2032
- Newest smart keys may take a CR2450
- No reprogramming needed
- The pocket starts the car with a dead fob
A Chevrolet key fob battery replacement takes five minutes: read the old cell, fit a fresh branded CR2032 or CR2450 the same way up, and test. No reprogramming is needed. If the fob still fails, check the spare and the car before buying a new key.



