Best replacement key fobs for Ford Fusion
The Fusion used five different keys between 2006 and 2020, from a separate remote on a chipped key to two generations of push-button smart key. The right replacement depends on your Fusion's year, whether it has push-button start and the FCC ID printed on your old key, and the right one costs far less than a dealer key.
We split our eight picks into two tables: Fusions you start with a key, and Fusions with push-button start. Each pick names the years it fits, the FCC ID and part number to check, and how it gets programmed, so you know before you buy whether it’s a driveway job or a locksmith visit.
Key takeaways
- Read the back of your key The FCC ID and part number decide what works, not the photo.
- Key or push start? Keyed and push-button Fusions from the same year use different keys.
- 2017 changed everything Push-button keys from 2016 and 2017 aren’t interchangeable.
- Two keys save money With two working keys, many owners can add a third at home.
Which replacement key fobs for Ford Fusion fit your year
The best replacement key fobs for Ford Fusion owners are the ones that match the key already on your ring, and the Fusion used five different keys in its fourteen model years. Ford sold the Fusion in America from the 2006 to the 2020 model year, across two generations, and each generation came with both a turn-key ignition and push-button start depending on trim. A key that looks right in a photo can still be the wrong frequency, the wrong chip or the wrong button layout, so start by working out which family yours belongs to.
2006–2009, first generation. Most early Fusions start with a plain metal key that has a transponder chip moulded into its plastic head. Locking and unlocking is done by a separate 4-button remote with a trunk button, usually FCC ID CWTWB1U345, with some cars using CWTWB1U322.
2010–2012, late first generation. Many of these cars moved to a remote head key, where the chip, buttons and blade are one piece. The FCC ID on the back is OUCD6000022. Some earlier cars have this key too, so check what you have rather than going by year alone.
2013–2016, second generation, keyed. S and most SE Fusions with a normal ignition use a 4-button flip key with a folding blade, FCC ID N5F-A08TAA and Ford part number 164-R7986. Keyed cars after the 2017 refresh carry a flip key with the same FCC ID, but check the part number on yours before buying.
2013–2016, push-button start. Titanium and many SE Fusions with Intelligent Access use a 902 MHz smart key, FCC ID M3N-A2C31243300 (part numbers 164-R7989, 164-R8119 or 164-R7991).
2017–2020, push-button start. The refresh brought new smart keys. Cars with factory remote start use a 5-button key, FCC ID M3N-A2C93142600; cars without it use a 4-button key, FCC ID M3N-A2C93142300 (part 164-R8150).
The FCC ID is moulded into the back of a separate remote, and printed on the back or under the battery cover of a head key, flip key or smart key. Write it down along with any part number starting 164-R, and count the buttons. Those three details matter more than the model year when you compare replacement key fobs for Ford Fusion listings.

Replacement key fobs for keyed Ford Fusions
|
2006–2009
Remote + key 2-pk
|
2010–2012
Vurkcy head key 2-pk
|
Keyed 2013–2016
SUPALAND flip key
|
Keyed 2013–2016
Self-program flip
|
|
|---|---|---|---|---|
|
|
|
|
|
| Fusion years | 2006–2009 | 2010–2012 | Keyed 2013–2016 | Keyed 2013–2016 |
| FCC ID | CWTWB1U345 | OUCD6000022 | N5F-A08TAA | N5F-A08TAA |
| Type | Remote + chip key | Remote head key | Flip key | Flip key + app |
| Programming | DIY remote, key 2-key | 2-key or locksmith | 2-key or locksmith | DIY via app |
| In the box | 2 remotes + 2 keys | 2 keys | 1 key | 1 key + kit |
| Our score | 8.1 /10 | 8.4 /10 | 9.0 /10 | 8.2 /10 |
| Price | – | – | – | – |
| View | View | View | View |
Replacement smart keys for push-button Ford Fusions
|
2013–2016
2013–16 smart key
|
2017–2020, RS
SUPALAND 5-btn RS
|
2017–2020, no RS
Dasbecan 4-btn
|
2013–2020
DIY key programmer
|
|
|---|---|---|---|---|
|
|
|
|
|
| Fusion years | 2013–2016 | 2017–2020, RS | 2017–2020, no RS | 2013–2020 |
| FCC ID | M3N-A2C31243300 | M3N-A2C93142600 | M3N-A2C93142300 | Most smart keys |
| Type | 5-btn smart key | 5-btn RS key | 4-btn smart key | DIY programmer |
| Programming | Locksmith | Locksmith | Locksmith | DIY via app |
| In the box | 1 key | 1 key | 1 key | Device only |
| Our score | 8.5 /10 | 8.7 /10 | 8.4 /10 | 7.9 /10 |
| Price | – | – | – | – |
| View | View | View | View |
The 8 best replacement key fobs for Ford Fusion, reviewed
We grouped our reviews of replacement key fobs for Ford Fusion models the same way as the tables: keyed Fusions first, from oldest to newest, then push-button Fusions. Each review says which years and FCC ID the key matches and who has to program it, so you can see whether the job ends in your driveway or at a locksmith's shop.
Two separate remotes and two transponder keys for first-generation Fusions
Most early Fusions start with a plain metal key that hides a transponder chip in its head, and lock and unlock with a separate 4-button remote (lock, unlock, trunk and panic). This set replaces both halves at once: two remotes listed for FCC IDs CWTWB1U345, CWTWB1U331 and CWTWB1U322, and two uncut chip keys.
The remotes pair at home with Ford’s eight-turn ignition routine, and the seller includes step-by-step instructions. The keys are where you need to be careful. The seller lists them as 80-bit chips, and they program at home only if you already have two working keys; otherwise a locksmith cuts and programs them. Some of the earliest Fusions use the older 40-bit chip, so ask your locksmith before you rely on the keys.
If only the remote has died, this is still good value: you get a spare remote in the same box.
- Remotes and keys in one order
- Remotes pair at home
- Batteries fitted
- Check chip type for your year
- Keys need cutting
Two remote head keys for keyed Fusions where the buttons sit in the key head
Later first-generation Fusions moved the buttons into the key head, so the chip, remote and blade are one piece. Ford calls this an integrated keyhead transmitter, and the FCC ID on the back is OUCD6000022.
Vurkcy lists this pair for the 2007–2012 Fusion (and the Mercury Milan and Lincoln MKZ of the same years) under part number 164-R7043, at 315 MHz with lock, unlock, trunk and panic buttons. Both keys arrive pre-tested with batteries fitted, and the seller links to self-programming instructions. Because the key also starts the car, it has to be taught to Ford’s anti-theft system: with two working keys you can usually do that yourself, and with one you’ll need a locksmith.
Two keys in the pack makes it a good buy if you’re down to your last key and want a spare in the drawer.
- Two keys per pack
- DIY with two working keys
- 24-month warranty
- Blades need cutting
- Not for push-button cars
The key most keyed second-generation Fusion owners carry
The second-generation Fusion arrived for 2013 with a new key: a 4-button flip key with a folding HU101 blade, FCC ID N5F-A08TAA and Ford part number 164-R7986. It’s the key on a large share of the Fusions still on the road, because S and SE trims with a turn-key ignition were the volume sellers.
SUPALAND names the 2013–2016 Fusion directly and lists both Ford part numbers (164-R7986 and Strattec 5924003), which makes it easy to check against your old key. It ships pre-tested at 315 MHz with the battery fitted. SUPALAND says programming needs a locksmith or dealer, though owners with two working keys can often use Ford’s two-key routine.
It’s our best overall pick because it fits so many Fusions, the listing is clear and the price leaves room for a locksmith to cut the blade.
- Names the 2013–2016 Fusion
- Both part numbers listed
- Pre-tested, battery fitted
- Blade needs cutting
- Seller says locksmith programming
A flip key you can program at home, even without two working keys
Remote2program takes a different route from the other flip keys here. The key comes with a programming kit and a phone app that walks you through pairing at home, so you don’t need a locksmith’s tool or two working keys to run Ford’s onboard routine.
It’s listed for the 2013–2016 Fusion sedan with FCC ID N5F-A08TAA at 315 MHz, with four buttons and a battery fitted. You pay several times the price of a plain flip key for that convenience, and the blade still has to be cut to your lock. It makes most sense for owners who are down to one key, live far from a locksmith or simply want to do the job in the driveway.
Check the app’s vehicle list for your exact year before ordering, and keep the 30-day return window in mind.
- Program at home via app
- Works with one existing key
- Battery fitted
- Much pricier than a plain key
- Blade still needs cutting

The proximity key for push-button second-generation Fusions before the 2017 refresh
Titanium and many SE Fusions from 2013 to 2016 came with Ford’s Intelligent Access: you keep the key in a pocket and press the start button. These cars use a 902 MHz smart key with FCC ID M3N-A2C31243300, the same key family as the 2015–2017 Edge and Mustang and the Lincoln MKZ.
This listing names the 2013–2016 Fusion first and lists the part numbers 164-R7989, 164-R8119 and 164-R7991, so you can match whichever one is on your old key. It comes with the battery and an emergency blade inside. The seller says a locksmith or technician must program it.
Don’t buy it for a 2017 or later Fusion: the refresh brought a different key.
- Names the 2013–2016 Fusion
- Three part numbers listed
- Emergency blade included
- Locksmith programming
- Blade needs cutting
The remote-start proximity key for refreshed push-button Fusions
The 2017 refresh gave push-button Fusions a new smart key. Cars with factory remote start use a 5-button key at 902 MHz, FCC ID M3N-A2C93142600 (also written M3N-A2C931426), with lock, unlock, trunk, panic and remote-start buttons.
SUPALAND lists the Fusion from 2017 on and the matching Mustang, and names the Ford part numbers 164-R8149, 164-R8162 and 164-R8275, which cover the different labels the same key has carried. It arrives pre-tested with the battery fitted. SUPALAND says a locksmith or dealer must program it.
Only buy the 5-button key if your current key has the remote-start button. A key can’t add remote start to a Fusion that wasn’t built with it.
- Keeps factory remote start
- Three part numbers listed
- Pre-tested, battery fitted
- Locksmith programming
- Not for 4-button cars
The smart key for push-button Fusions without remote start
Push-button Fusions from 2017 on that weren’t built with remote start use a 4-button smart key: lock, unlock, trunk and panic. Its FCC ID is M3N-A2C93142300 and the Ford part number is 164-R8150, and it is not interchangeable with the 5-button remote-start key above.
Dasbecan puts the 2017–2021 Fusion first in its listing, alongside the Mustang that shares the key, and quotes both the FCC ID and the part number. Like every smart key on this list, it needs its emergency blade cut and a locksmith or dealer to program it unless you can use Ford’s two-key routine.
It’s a sensible spare for the many SE Fusions that have push-button start without remote start.
- Names the 2017-on Fusion
- FCC ID and part number listed
- Emergency blade included
- Locksmith programming
- Blade needs cutting
A plug-in programmer for owners who want to add a smart key themselves
This isn’t a key. It’s a small programming device that plugs into the car and works with a phone app to teach a new smart key to a push-button Ford or Lincoln. The seller lists support for keys with FCC IDs M3N5WY8609, M3N-A2C31243300 and M3N-A2C93142600, which covers both generations of push-button Fusion smart key.
Pair it with one of the smart keys above and you can skip the locksmith’s programming fee, which makes sense if you’re adding several keys or keeping more than one Ford on the drive. It can program up to eight keys where the car allows it. The blade inside the new key still has to be cut at a locksmith or hardware store.
For a single spare key, a locksmith visit may cost about the same, so do the sums first.
- Program smart keys at home
- Covers both push-button generations
- Reusable across Fords
- Key not included
- Costs as much as a locksmith visit
Programming replacement key fobs for Ford Fusion at home
Whether you can program replacement key fobs for Ford Fusion models yourself depends on the kind of key and on how many working keys you already have.
A separate remote on an early Fusion is the easy case, because it never talks to the anti-theft system. Ford's onboard routine pairs it: with the doors closed, turn the ignition from off to run eight times within about ten seconds, ending in run. The locks cycle to show the car is listening, and you then press a button on each remote you want to keep, including the old ones. Owners on this Mustang Forums thread about a 2007 Fusion describe exactly that routine.
Anything that starts the engine has to be taught to PATS, Ford's Passive Anti-Theft System. Ford built in a two-key routine for this: switch on with your first programmed key for a few seconds, switch off, do the same with your second key, then switch on with the new key within the time window. On a remote head key or flip key, the same routine usually teaches the buttons too. Ford explains the steps in its guide to programming an integrated keyhead transmitter.
Push-button Fusions have their own version that uses the backup position, the spot where you hold the key if its battery is flat (on the Fusion it sits in the cupholder or console). The owner's manual describes it, but plenty of owners report that it refuses to run on 902 MHz keys, and then you need an automotive locksmith or a Ford dealer with a programming tool on the OBD-II port. With only one working key, the two-key routine won't run on any Fusion, so book a locksmith or use a self-programming kit.
What owners say about replacement key fobs for Ford Fusion
The most common complaint isn't a broken key, it's a tired battery. Short range, buttons that only work next to the car and a "No Key Detected" message on a push-button Fusion usually point to the coin cell first, so try a fresh CR2032 before you order anything. Our Ford key fob battery guide shows how to open each type.
The second complaint is a car that won't see a perfectly good key. One technician on Diagnostic Network chased a 2017 Fusion that showed "No Key Detected" unless the fob sat in the cupholder backup spot, even though both fobs locked and unlocked the car from a distance. The antennas tested fine, and adding a third key failed too, so the car went to a dealer. If two keys behave the same way, the fault is probably in the car, not the fob, and a new key won't fix it. Our guide to a car not detecting the key fob covers the usual causes.
The third is buying replacement key fobs for Ford Fusion cars by photo. Fusion keys from neighbouring years look almost identical, and a 2016 smart key won't start a 2017 car. Owners who matched the FCC ID and part number report few problems; owners who matched a picture are the ones writing about returns. A few also find that a seller's "fits Fusion" covers only the sedan's keyed trims, so read the whole listing.
How to choose replacement key fobs for Ford Fusion
These decide whether the key will talk to your Fusion.
Keyed and push-button Fusions use different keys, even in the same year.
2013–2016 and 2017–2020 push-button Fusions use different smart keys.
A key can’t add features your Fusion doesn’t have, such as remote start.
DIY works for separate remotes and, with two working keys, for most chipped keys.
How to add a spare key to your Fusion
-
Count your working keys
Ford’s onboard routine needs two keys that already start the car. With only one, book a locksmith or use a self-programming kit.
-
Order the matching key
Match the FCC ID, part number and buttons from the tables above.
-
Get the blade cut
Have a locksmith cut the new blade, or the emergency blade inside a smart key, to match your old key or the car’s key code.
-
Run the two-key routine
Switch on with the first key, then the second, then the new key, keeping to the times in your owner’s manual. Ford’s keyhead transmitter guide walks through it.
-
Test everything
Check that the new key starts the engine and that every button, including remote start, works from a few yards away.
Try a new CR2032 battery first; see whether you need to reprogram after a battery change. If you’ve lost every key, read what to do if you lose your only car key.
OEM vs aftermarket replacement key fobs for Ford Fusion
A genuine Ford key from a dealer is the safest fit, but it's the most expensive route, because you pay dealer prices for the key and then a separate charge to cut and program it. Aftermarket replacement key fobs for Ford Fusion models cost a fraction of that and use the same FCC IDs and frequencies, so a locksmith programs them the same way. For a Fusion that's now between six and twenty years old, that saving can be a large share of what the car is worth.
The trade-offs are in build quality and support. Aftermarket cases can feel lighter, the button pads can wear sooner, and a few listings stretch their fitment lists. Buying from sellers that print the FCC ID and part number, pre-test their keys and offer a warranty cuts most of that risk. Our OEM vs aftermarket key fob guide goes deeper.
Some dealers won't program a key they didn't sell, so if you buy online, call an automotive locksmith first and ask whether they'll program a customer-supplied key for your Fusion's year.
Who each of these replacement key fobs for Ford Fusion suits
Choosing between these replacement key fobs for Ford Fusion models comes down to the model year and the ignition. If you drive a keyed 2013–2016 Fusion, start with our best overall pick, the SUPALAND flip key; if you're down to one key and want to avoid a locksmith, the Remote2program flip key programs through an app. Early Fusions with a separate remote need the remote and key set, and keyed 2010–2012 cars need the Vurkcy head key pair.
On push-button Fusions, follow the year and the buttons: the 902 MHz smart key for 2013–2016, the SUPALAND 5-button key for 2017–2020 cars with remote start and the Dasbecan 4-button key for those without. If you plan to add keys to more than one Ford, the Remote2program device can pay for itself. For other Ford models, see our Ford key fob roundup and our guides for the Explorer, Escape and Focus.
Replacement key fobs for Ford Fusion: FAQ
Can I program a Ford Fusion key fob myself?
Often, yes. Separate remotes on early Fusions pair with the eight-turn ignition routine. Chipped keys, head keys and flip keys can usually be added at home if you already have two working keys. With one key, or on many push-button smart keys, you’ll need a locksmith, a dealer or a self-programming kit.
Where is the FCC ID on my Fusion key?
On a separate remote it’s moulded into the back of the case. On a flip key, head key or smart key it’s on the back or under the battery cover. Note the Ford part number too, which usually starts with 164-R.
Will a 2016 Fusion smart key work on a 2018 Fusion?
No. 2013–2016 push-button Fusions use FCC ID M3N-A2C31243300, while 2017–2020 cars use M3N-A2C93142600 (with remote start) or M3N-A2C93142300 (without).
Why does my Fusion say No Key Detected?
Usually a weak battery in the key. Try a new CR2032 and hold the key in the backup position to start the car. If two different keys both fail, the fault may be in the car’s antennas or body module, not the key. See our guide to a car not detecting the key fob.
What battery does a Ford Fusion key fob use?
Most Fusion remotes, flip keys and smart keys use a CR2032 coin cell. Check the old cell, and see our Ford key fob battery guide for how to change it.
The bottom line
- Check whether your Fusion is keyed or push-button first
- Match the FCC ID, part number and buttons
- Buy a spare while you still have two working keys
- 2013–2016 and 2017–2020 smart keys don't swap
The best replacement key fobs for Ford Fusion sedans are the ones that match your key exactly. The SUPALAND flip key is our top pick because it fits the large number of keyed 2013–2016 Fusions at a low price. Early Fusions need the remote and key set or the Vurkcy head keys, and push-button owners should match the smart key to their year and buttons.



