Best keyless entry remote replacements
A keyless entry remote is the separate clicker that locks and unlocks your car while a normal metal key starts it. Lose one, or wear the buttons out, and the dealer will often quote far more than the part is worth. The best keyless entry remote replacements match your original exactly, arrive tested with a fresh battery, and on many older cars can be programmed in your driveway in a few minutes.
We picked eight remotes that cover Ford, GM, Jeep, Honda, Hyundai, Kia and Subaru, from Dorman’s OE-style units to low-cost two-packs. Prices in the tables and cards below update automatically.
- Match the FCC ID, part number and buttons
- Many older remotes program at home
- Remote only: your key still starts the car
Key takeaways
- It's a remote, not a key A keyless entry remote has no blade and no immobilizer chip, so there is nothing to cut. Your existing key still starts the engine.
- The FCC ID is the minimum match Copy the FCC ID and part number from the back of your old remote or inside its battery cover, then make sure the replacement lists both.
- Programming varies by brand Ford, Honda, Subaru and many GM and Jeep remotes have an on-board routine; Hyundai and Kia remotes on our list need a locksmith or dealer.
- Two-packs are often the best value A second remote frequently costs little more, and programming both at once saves another session later.

Ford, GM and Jeep keyless entry remotes compared
|
Best overall
Dorman Ford
|
Easiest GM
Dorman GM
|
Older GM
GM 2001–05
|
Jeep
Jeep Wrangler
|
|
|---|---|---|---|---|
|
|
|
|
|
| Fits | Older Ford/Lincoln | Select Chevy/GMC | 2001–05 GM cars | 2009–18 Wrangler |
| Buttons | 4 | 4 | Varies | 4 |
| FCC ID | See fitment | See fitment | KOBLEAR1XT | OHT692713AA |
| Programming | On-board | OBD plug-in | Self (guide) | Self (guide) |
| Our score | 9.0 /10 | 8.8 /10 | 8.4 /10 | 8.6 /10 |
| Price | – | – | – | – |
| View | View | View | View |
Honda, Hyundai, Kia and Subaru keyless entry remotes compared
|
Best value
Civic/Pilot 2-pk
|
Accord
Accord 2-pack
|
Hyundai
Hyundai/Kia
|
Subaru
Subaru
|
|
|---|---|---|---|---|
|
|
|
|
|
| Fits | 01–05 Civic, 03–07 Pilot | 2003–07 Accord | Elantra, Sonata, Optima | 1999–2006 Subaru |
| In the box | 2 remotes | 2 remotes | 1 remote | 1 remote |
| FCC ID | NHVWB1U521/523 | OUCG8D-380H-A | OSLOKA-950T | A269ZUA111 |
| Programming | DIY | DIY | Locksmith | DIY |
| Our score | 8.9 /10 | 8.6 /10 | 8.3 /10 | 8.5 /10 |
| Price | – | – | – | – |
| View | View | View | View |
Ford, GM and Jeep keyless entry remotes: detailed reviews
An OE-style replacement for the separate Ford remote, set up with an on-board routine
Dorman is one of the best-known names in replacement auto parts, and this remote is the safest pick on our list of keyless entry remote replacements for older Fords. It is built to look and work like the original separate Ford transmitter, uses drop-resistant parts, and comes with printed instructions for Ford’s on-board programming procedure, so most owners can set it up without a dealer visit.
On many key-ignition Fords, that procedure means turning the key from off to run eight times within about ten seconds, waiting for the locks to cycle, then pressing a button on each remote. You need at least one working original key, and the car must have come with keyless entry from the factory. Use Amazon’s fitment check: Ford used several similar remotes, and the button layout must match yours.
- OE-style fit and feel from a major parts brand
- DIY on-board programming
- Limited lifetime warranty
- Costs more than no-name remotes
- Single remote per box
- Ford-family vehicles only
Lock, unlock, remote start and panic, with a plug-in programmer for the OBD II port
Many GM trucks and SUVs need a scan tool to add a remote, which usually means a locksmith or dealer. Dorman gets around that by putting a small patented programmer in the box. You plug it into the OBD II port under the dash, follow the steps, and the new remote is set up in minutes.
The four buttons are lock, unlock, remote start and panic, so this is for GM vehicles that came with factory remote start. As with every Dorman remote, you need at least one original key or fob, and the vehicle must have been built with keyless entry. It is the priciest pick in this group, but it is often still less than a dealer charges for a remote plus programming.
- Programmer included, no scan tool needed
- Factory-style remote start button
- Major-brand quality and warranty
- Most expensive pick here
- Only for GM models with remote start
- Needs an original key or fob
A low-cost replacement for a remote used across many early-2000s GM cars and vans
GM used this remote on a long list of early-2000s vehicles: the Impala, Monte Carlo, Malibu, Blazer, Astro and Express, plus Buick, Cadillac, Oldsmobile, Pontiac and GMC models of the same era. Vurkcy’s version replaces FCC IDs KOBLEAR1XT and KOBUT1BT and a long list of GM part numbers, and arrives pre-tested with the battery installed.
Self-programming instructions are linked in the listing. The seller is clear that if the procedure is too fiddly, or you have no original remote, a locksmith or dealer should do it. GM fitted several button layouts to this remote, so compare yours with the photos before you order.
- Very wide early-2000s GM coverage
- Low price
- Pre-tested with battery fitted
- Several button layouts exist
- Instructions are only online
- No-name brand
A 4-button remote with remote start for JK-era Wranglers and the Compass and Patriot
The JK Wrangler, Compass and Patriot use a separate remote alongside a conventional key, and lost or cracked ones are a constant topic on Jeep forums. This Vurkcy remote replaces FCC ID OHT692713AA, with lock, unlock, remote start and panic buttons, and comes pre-tested with its battery fitted.
The seller links self-programming instructions and recommends a locksmith if you don’t have an original remote. Make sure your old remote has the same four buttons: Jeeps without factory remote start used a 3-button version.
- Matches the factory remote-start layout
- Low price for a Jeep remote
- 24-month warranty
- Needs a working original for DIY
- Not for 3-button versions
- Plastic lighter than OEM

Honda, Hyundai, Kia and Subaru remotes: detailed reviews
Two remotes with instructions for the seventh-generation Civic and first-generation Pilot
Seventh-generation Civics are still everywhere, and their separate remotes are usually worn out by now. This USARemote two-pack replaces FCC IDs NHVWB1U521 and NHVWB1U523 for the 2001–2005 Civic DX, LX and EX and the 2003–2007 Pilot, and includes programming instructions.
Honda’s on-board routine for this era uses the ignition switch and a remote button pressed in a timed sequence, so you can usually add both remotes in a few minutes without a tool. Two remotes for about the price of one makes this the best value on our list.
- Two remotes in one order
- Honda’s on-board programming
- Instructions included
- Narrow model coverage
- Timed routine can take a few tries
- Basic plastic case
Two 4-button remotes with trunk release for the seventh-generation Accord
The 2003–2007 Accord also uses a separate remote, FCC ID OUCG8D-380H-A, with lock, unlock, trunk and panic. Vurkcy’s two-pack replaces part number 35111-SHJ-305, runs on the same 313.8 MHz frequency as the original, and ships with batteries installed and each remote pre-tested.
Self-programming instructions are linked from the listing, and the seller offers a 24-month warranty with free returns if a remote won’t work. Check that your original has four buttons, since some Accords left the factory with a different layout.
- Two remotes per order
- Exact frequency and FCC ID listed
- Long warranty
- Instructions only online
- Accord 2003–2007 only
- No-name brand
A separate remote for key-start Elantra, Sonata and Optima models
This remote replaces FCC IDs OSLOKA-950T, OSLOKA-310T and OSLOKA-360T and part numbers such as 95430-3K200 and 95430-2H200. It fits key-start versions of the Hyundai Elantra (not the Elantra GT) and Sonata and the 2006–2010 Kia Optima.
Unlike most picks here, it can’t be programmed at home: MechanMagic says a locksmith or dealer must do it, and it won’t work on push-button-start cars. Budget for that visit. A locksmith is usually cheaper than the dealer, and if you add the remote while you’re there for something else, the trip costs less.
- Covers popular Hyundai and Kia sedans
- Low price for the part
- Clear FCC ID and part-number list
- Needs a locksmith or dealer
- Short 90-day warranty
- Not for push-start models
A self-programmable 2-button remote for early Subarus
Early Subarus used a small two-button remote, FCC ID A269ZUA111 (part 88035AC230), and plenty of these cars are still on the road. This replacement comes fully tested with the battery and electronics installed, plus step-by-step self-programming instructions.
It covers the 1999–2006 Baja, Forester, Impreza, Legacy and Outback, but Subaru changed remotes mid-run on some models, so check that yours has the same FCC ID and two buttons. For the later four-button Subaru remote (NHVWB1U711) you’ll need a different part.
- Self-programming instructions included
- Fully tested, battery installed
- Covers five Subaru models
- Only two buttons
- Check for mid-run remote changes
- Single remote
Why a replacement keyless entry remote won't work
Read owner reviews and forum threads about keyless entry remote replacements and the same complaint comes up most: the new remote won’t program. Usually the remote isn’t faulty and the mismatch is somewhere else. The FCC ID matches but the part number doesn’t. The button layout is slightly different, with trunk where the original had hatch glass, or no remote-start button. Or the car’s model year needs a scan tool rather than the on-board routine.
Locksmiths raise another point. In Locksmith Ledger, one locksmith writes that the FCC ID printed on the case doesn’t always match the circuit board inside, especially on re-shelled or refurbished remotes, and that some replacement boards carry the right FCC ID but still aren’t interchangeable. That is why we favored sellers that list part numbers as well as FCC IDs and pre-test every unit.
The other complaints are about build quality and expectations. The cheapest no-name remotes can have mushy buttons, short range and a battery that is already half flat when it arrives. And many owners don’t realize that on-board programming often erases every remote the car knows, so the old remotes have to be programmed again in the same session.

How to choose a keyless entry remote replacement
The FCC ID is printed on the back of most remotes or inside the battery cover. The part number narrows it down, because one FCC ID can cover several versions.
Lock, unlock, trunk, hatch glass, remote start and panic must match your original, button for button.
Older Ford, Honda and Subaru remotes usually program on-board. Some GM, Jeep, Hyundai and Kia models need a tool, a locksmith or a dealer.
US remotes mostly run on 315 MHz, while some Hondas use 313.8 MHz. A different frequency simply won’t talk to the car.
Sellers that pre-test remotes and offer long warranties are easier to deal with when something doesn’t work first time.
Keyless entry remote vs smart key vs remote head key
Before you buy, check which kind of fob your car actually uses. A keyless entry remote is a separate transmitter: it locks and unlocks, and a normal key with its own transponder chip starts the engine. Because the remote has no immobilizer role, it is the cheapest and easiest type to replace, which is why every pick on this list is one.
A remote head key or flip key puts the remote and the chipped key in one unit, so it has to be cut and programmed to start the car. A smart key or proximity fob works with push-button start and almost always needs a locksmith tool. If your car uses one of those, our guides to aftermarket car key fobs and universal car key fobs are a better place to start, and our replacement key fobs for popular vehicles roundup covers model-specific picks.
How to program a keyless entry remote yourself
-
Confirm your car supports it
Check the seller’s instructions and your owner’s manual for your model year. If the listing says a locksmith or dealer is required, as with the Hyundai/Kia pick, book one.
-
Gather every remote
Most on-board routines erase existing remotes, so keep all the remotes you want, old and new, in the car with you.
-
Enter programming mode
Follow the routine exactly. Many Fords use eight key turns from off to run within about ten seconds; Honda, Subaru, GM and Jeep each use their own sequence of key turns, door switches or buttons.
-
Press a button on each remote
When the locks cycle to confirm programming mode, press lock or unlock on each remote in turn and wait for the locks to cycle again.
-
Test before the return window closes
Check every button and the range from across a parking lot. Our guide to programming a key fob covers more brands.
If your remote works only some of the time or only up close, replace its coin cell before you buy anything. Our key fob battery guide lists the cells we trust. If the remote works but the case is cracked, a new shell is cheaper still.
Keyless entry remote replacement FAQ
Can I program a keyless entry remote myself?
Often, yes. Older Ford, Honda and Subaru remotes and many GM and Jeep remotes use an on-board routine. Some models need a scan tool, a locksmith or a dealer, so check the instructions for your exact year.
Will a replacement keyless entry remote start my car?
No. A keyless entry remote only locks and unlocks (and runs remote start if your car has it). Your metal key and its chip still start the engine.
Do I need my old remote to program a new one?
Many routines need at least one working original key, and some need a working remote too. Dorman, for example, says at least one original key or fob is required.
Why won't my new remote program?
The usual causes are a different part number or button layout behind the same FCC ID, a model year that needs a tool, or a missed step. See why a key fob stops working for more fixes.
Are aftermarket keyless entry remotes as good as OEM?
The better ones work just like the original, though the plastic may feel lighter. Dorman’s OE-style units are the closest match; pre-tested remotes from established sellers are the next best option.
How much does a dealer charge to replace a keyless remote?
It varies by brand, but the dealer price usually includes the part, a markup and a programming fee. Our replacement key fob cost guide breaks it down.
The bottom line
- Match the FCC ID, part number and buttons
- Many older remotes program in minutes at home
- Two-packs give you a spare for little extra
- Budget for a locksmith where the listing says so
The best keyless entry remote replacements are the ones that match your car exactly and that you can program without a dealer. Dorman’s Ford remote is our top pick for quality and easy setup, and its GM remote with a plug-in programmer saves a tool-only job. USARemote’s Civic/Pilot two-pack is the best value, while the Jeep, Accord and Subaru remotes cover popular older models for little money. Hyundai and Kia owners get a cheap part but will need a locksmith. Check your codes first and you’ll pay a fraction of the dealer price.





